Medieval wall construction
After the fall of the Roman Empire around 500 CE and into the Middle Ages, solid stone wall construction continued as a prevelant building material throughout Britain. Medieval builders had a good understanding of engineering and of solid wall construction, often building large temporary timber structures to keep stone walls in place as the lime mortars set, creating increasingly sophisticated Medieval Architecture. A large number of churches were built prior to the battle of Hastings in 1066, many of which stand today, are some of the oldest buildings in England and most are solid wall construction of stonewith lime mortar. The oldest is likely to be Beehive cells a monastic centre Eileach an Naoimh, Argyll, Scotland or St Martin's Church, Canterbury which is the oldest church building in England, and still being used.
During and after the Norman conquest, William the Conqueror ordered the construction of a vast number of castles, towers, cathedrals and churches across his realm, almost all of which were solid wall stone and most made from Caen stone brought from France. The best known examples of these are Norwich, Lincoln and Richmond Castles, Canterbury Cathedral,, Westminster Abbey and the Tower of London. In general the stone in most Medieval castle walls was built within a wooden frame designed to hold it in place while the mortar dried, in some cases for thicker walls, a cavity may have been introduced though it would usually have then been completely filled with rubble. In some examples very wide cavities were created between two single stones walls to house a thin stair case or rampart.
One construction method that stems from the Medieval period is the half-timber framed house, greek wood or oak frame with a wattle and daub infills. This type of wall build-up ais made up of different layered materials the full depth of the timbers. It was usually employed as part of a timber frame building as the infill between the framing elements. Wattle was substrate for the infill, usually wooden strips or thin branches, reeds, grasses or vines woven to form a plate spanning between and fixed to the frame. The wattle substrate was then covered with daub, made up of a combination of binders, clay, lime, chalk dust, etc, aggregates, subsoil, sand, crushed stone etc and reinforcement such as straw, hay and other fibrous materials creating a solid build-up between structural members also full depth, or covered internally.
Whilst earth was most likely used medieval Britain for earth burred stores, pits and dug outs it was not until some time later, around the 1400's that cob buildings started to appear across parts of Devon, Cornwall and Wales. This mixture of sandy sub-soil, clay and straw was often shuttered in place creating walls of half to one meter thick, wide enough to create a raised trail for livestock to walk over, thus stamping down the mixture to compact it. It was finished with a lime render and then a lime wash externally as wellas in some cases a lime plaster internally creating a breathable hygroscopic massive solid wall build up.
[edit] Related articles on Designing Buildings
- Architectural styles.
- Boss (medieval architecture).
- Durham Cathedral's Open Treasure project.
- Early medieval period.
- English architectural stylistic periods.
- Floors of the great medieval churches.
- Perpendicular Gothic.
- Romanesque Architecture.
- The Dukes of Normandy and the second world war.
- Main author
- Medieval architecture.
Featured articles and news
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.
Biodiversity and the built environment digital series
The nature of building, with CIOB and CWP.
A call for prevention and sensitive re-use.
Risks to the long-term effectiveness of the BNG scheme
National Audit Office publish review of Biodiversity Net Gain.
The CIAT principal designer register
Providing assurance and verification of the capability and competence of registered ATs.
Building Safety recommendations and Northern Ireland
The NI roadmap to improving safety in high rise residential.
Specifying rendered external wall insulation for fire safety
How to interrogate the evidence provided to the specifier.
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
No Falls Week. The importance of safe working at height
What to expect and what is on offer to avoid accidents.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.
From engineered product life-spans, to their extension.
Circular economy in the built environment
A brief description from 2021. Where are we now?
CLC publishes domestic retrofit competency framework
Roadmap of Skills for net zero.
Understanding is key to conservation.
Open industry engagement survey seeks responses
Institutions and the importance of engagement.